Descrizione
Introduction to products:
Single Roller Internal Groove Burnishing Tools can be used for smoothening and work hardening of external and internal grooves.
Advantages:
- Useable for both external and internal grooves
- Are not dependent on diameters of the workpiece
Single Roller Internal Groove Burnishing Tools for External Use
| Application “internal” | from Ø 50 mm and up to 120 mm depth |
|---|---|
| Application “external” | from Ø 20 mm |
| Roller | tailor made |
Application parameters:
Please note that this information represents standard values which must be adapted to the individual cases.
| Speed | up to 100 m/min depending on the application |
|---|---|
| Feed rate | 0.05 — 0.3 mm/rev |
| Workpiece allowance | up to 0.03 mm |
| Tool pre-load | up to 1.5 mm |
| Lubrication | emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life |
| Pre-machining of workpiece | surface roughness up to 15 μm |
| Workpiece hardness | up to 45HRC |
